"Create New Folder Failure" error message is on my ColorSpace UDMA, what should I do?
It could be that the backup path is changed, please go to Setup > Reset the ColorSpace UDMA. After that, it should able to backup data from the memory card.
If it still fails to operate, please send |
Can ColorSpace UDMA support Progressive JPEG files?
Sorry, at this moment ColorSpace UDMA does not support Progressive JPEG files. |
Can the ColorSPACE UDMA and the ColorSpace for iPad support 1TB, 2.5" hard disk ?
The ColorSpace UDMA and ColorSpace for iPad cannot support 1TB hard disk, they can support up to 750GB hard disk only. |
Does ColorSpace UDMA or Album support SDXC card?
Sorry, neither the ColorSpace UDMA nor the Album can support SDXC card. |
Does HyperDrive ColorSpace UDMA support the compact flash card Ultimate 600x?
Yes, It does support 600x CF card, except the Kingston brand due to compatible issues. |
Full screen RAW images do not display with the correct colors but thumbnails appear fine.
The advantage of shooting in RAW is that you are obtaining data directly from the image sensor without any image processing (e.g. image sharpening, white balance etc.) or alterations, thus ensuring in |
How do I replace the internal battery?
1. First remove the screws on the side of the device.
2. Pull down the back cover and remove the battery that is already inside.
3. The Battery has grooves on the + side and is smooth on the - |
How to transfer data from ColorSpace UDMA to external USB hard disk via OTG adapter?
1.) Connect the OTG adapter to ColorSpace UDMA and other end of adapter is connected to an external USB disk. Power up the OTG adapter with AC charger plugged in. 2.) Go to T |
I got a wrong .SEF error message on ColorSpace UDMA, how do I fix it?
To re-install correct SEF into the ROM of UDMA, please try the following
steps:
1, Download the latest firmware .SEF file from www.hypershop.com and store it
into the root folder of an empty memory |
I have "HDD NOT FOUND" Error on my ColorSpace UDMA, what should I do?
It is most likely the hard disk is bad. In order to confirm it, please remove hard disk from ColorSpace UDMA by unscrewing both sides of the cover case.
Swap in another known good 2.5" SATA interface |
I upgraded my ColorSpace UDMA to firmware version 29, but I can not turn off the sound during start up.
In order to turn the sound off during starting up, please upgrade the firmware v29 twice and then go to Setup > set Key Sound to OFF
After that, it will be in a silent mode during start up and shut d |
Streaming video from all previous models of ColorSpace on iPad via CloudFTP/ iUSBPort.
Please follow the step by step instruction below: 1.) Connect the ColorSpace unit to CloudFTP / iUSBPort, and have both unit turn on. 2.) Select USB icon on ColorSpace unit and hit Enter. 3.)Set the W |
USB OTG in COLORSPACE UDMA
What is USB OTG?
USB OTG (On-The-Go) technology allows COLORSPACE UDMA to interface and exchange data directly with another USB device (card reader, hard drive, digital camera etc.) |
When I try to update firmware for the ColorSPACE UDMA, I got a "FILE READ ERROR" message, then the device shuts down.
Once the unzipped firmware file is copied into ColorSpace UDMA's hard disk, please go to Function > Firmware update > Select File C: drive, DO NOT press central button to access C: drive, please press |
Where can I get the SDL Scripting manual?
The SDL Scripting manual is on our website, please click the following link:
http://www.hypershop.com/HyperDrive-COLORSPACE-UDMA-SDL-Scripting-Language-s/75.htm |
